Component Inspection

Engine Control
P2010 Intake Manifold Runner Control Circuit High(Bank 1) - Inspection/Repair:_:Component Inspection

Component Inspection

Check VCMA
1. IG "OFF" and install a GDS.
2. Connect probe to VCMA feedback signal terminal and to check signal waveform by using oscilloscope function.
3. Measure signal waveform of VCMA by excuating 'VCM Type vis 1' of actuation test in GDS menu.

Specification :Refer to Signal Waveform & Data




4. Is the measured signal waveform O.K?