Mirror

Replacement

Outside Rear View Mirror Assembly Replacement

NOTE:
- When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Using a screwdriver, remove the quadrant inner cover (A).
2. Push the lock pin (B), then remove the tweeter speaker connector (C).




3. After disconnecting the connector (A), then remove the outside rear view mirror (B).

Tightening torque :
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb-ft)




4. Installation is the reverse of removal.

Inside Rear View Mirror Assembly Replacement
Mirror Replacement
1. Push the inside rear view mirror base (A) up to remove the inside rear view mirror assembly (C).




2. Installation is the reverse of removal.
ECM Mirror Replacement
1. Using a screwdriver, then remove the ECM mirror cover (A).




2. Disconnect the connector (A).
3. Loosen the mounting screw (C), push the ECM mirror base down to remove the ECM mirror assembly (B).




4. Installation is the reverse of removal.