Flex Plate

Flex Plate

AT : Install the drive plate (A) and the adapter plate (B).

Tightening torque 117.7 - 127.5 N.m (12.0 - 13.0 kgf.m, 86.8 - 93.9 lb-ft)






NOTE:
- Always use new drive plate (or flywheel) bolts.
- Apply sealant to the screw part (10mm (0.39in) from the end of the bolt) when reusing the drive plate (or flywheel) bolts.
Sealant:Three bond 2403, Loctite 200 or 204
- Install and uniformly tighten the 7 bolts, in several passes.