Power Mirror Switch: Service and Repair

Removal

Driver Door Mirror Switch
1. Disconnect the negative battery terminal.
2. Remove the front door trim.

3. Remove the screws (Inside:4EA, outside:1EA) from door module (A) and connectors (B).





NOTE:
Be careful not to damage the hook when removing the switch module.

Installation

Driver Door Mirror Switch
1. Install the driver door module and connectors.
2. Install the front door trim.

Inspection

1. Remove the front door trim and power door mirror switch module (A).





2. Check for the continuity between terminals of power door mirror switch according to the table.