Rear

Axle Nut

Install the split pin (A), then install the castle nut (B) and washer (C) from the front hub under applying the brake.

Tightening torque 215.7 N.m (22.0 Kgf.m, 159.1 lb.ft)






CAUTION:
- Have the convex side of washer (C) facing the outside, and then install castle nut (B) and split pin (A) to the driveshaft.
- After fastening castle nut to the initial tightening torque (22.0 Kgf.m), fit the closest hole in the direction of fastening.