Repair Procedures

Replacement

Console Assembly Replacement
[M/T]

NOTE:
- When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Using a screwdriver or remover, remove the console under cover (A).




2. Using a screwdriver or remover, remove the console rear cover (A).




3. Disconnect the connector (A).




4. Remove the extension side cover (A).




5. Remove the console tray mat (A).




6. After loosening the mounting bolts and screws, then remove the console assembly (A).




7. Installation is the reverse of removal.

NOTE:
- Make sure the connector is plugged in properly.
- Replace any damage clips.

[A/T]

NOTE:
- When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Disconnect the the knob (A).




2. Using a screwdriver or remover, remove the console under cover (A).




3. Disconnect the connector (A).




4. Using a screwdriver or remover, remove the console rear cover (A).




5. Disconnect the connector (A).




6. Remove the extension side cover (A).




7. Remove the console tray mat (A).




8. After loosening the mounting bolts and screws, then remove the console assembly (A).




9. Disconnect the connector (A).




10. Installation is the reverse of removal.

NOTE:
- Make sure the connector is plugged in properly.
- Replace any damage clips.