Repair Procedures

Inspection

Fuse
1. Be sure there is no play in the fuse holders, and that the fuses are held securely.
2. Are the fuse capacities for each circuit correct?
3. Are there any blown fuses?
If a fuse is to be replaced, be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the problem before installing a new fuse.

Removal

1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel (A).





3. Remove IPM (Intelligent intergrated Platform Module) connector (A), bolts and nut.




4. Remove IPM (A) after removing rear connectors.






Installation

1. Install IPM(Intelligent intergrated Platform Module).
2. Connect the IPM connector.
3. Install the crash pad lower panel.