Timing Cover - Remove - Engine Numbers With Suffix B

Timing Cover - Remove - Engine Numbers With Engine Suffix B

Note:
Timing cover, oil pump, oil pressure by - pass valve and oil pressure relief valve are only supplied as an assembly.





1. Secure tool LRt - 12 -080 to crankshaft pulley with 2 bolts.

2. Restrain crankshaft pulley using LRT - 121 - 080 remove crankshaft pulley bolt and collect spacer washer, remove crankshaft pulley.

3. Remove sump.





4. Remove 2 bolts securing oil pick-up pipe to timing cover.

5. Noting their fitted position, progressively slacken then remove bolts securing timing cover to cylinder block.

Caution:
Do not attempt to remove oil pump drive gear at this stage.

6. Release timing cover from oil pick-up pipe, remove cover.

7. Remove and discard ' O ' ring from oil pick - up pipe.





8. Remove oil pump drive gear.

9. Remove and discard gasket.

10. Remove and discard oil seal from timing cover.