Air Cleaner Assembly

Air Filter Housing:

REMOVE
1. Release two clips securing air cleaner to mass airflow sensor.
2. Release two nuts and bolts securing air cleaner to left hand valance mounting bracket.
3. Detach mass airflow sensor from air cleaner, and lay carefully to one side.
4. Detach air cleaner from center mounting bracket and withdraw from engine compartment.
5. Remove large O-ring from outlet tube of air cleaner. Replace if in poor condition.
6. Unclip three catches and remove inlet tube.
7. Remove nut and end plate securing air cleaner element in position.
8. Withdraw air cleaner element and discard.
9. Inspect dump valve for condition and free of obstructions. Air Cleaner Dump Valve

REFIT
1. Fit new element and secure in position.
2. Refit inlet tube.
3. Refit air cleaner to mounting bracket and secure.
4. Clip air cleaner to mass air flow sensor.