Sunroof Assembly - Manual, Front and Rear

Sunroof Assembly - Manual, Front and Rear

Sunroof Components:

Remove
1. Close sunroof.
2. Remove headlining.
3. Remove screws and manual regulator from clamping frame.
4. Disconnect drain tubes from each side of clamping frame.
5. Remove 13 screws and clamping frame from upper frame.
6. Remove upper frame assembly from roof aperture.

Refit
7. Position upper frame assembly into roof aperture.
8. Locate clamping frame and reconnect drain tubes.
9. Loosely fit screws, centralise upper frame and clamping frame assemblies and then tighten screws.
10. Reverse removal procedure.