Seats - Front - 5 Door Vehicles

Seats - Front - 5 Door Vehicles

Remove
1. Remove the finisher from the seat base.







2. Slide the seat to the full extent rearwards and remove the front base to floor securing screws.
3. Slide the seat forwards and remove the rear base to floor securing screw.
4. Lift the seat and base assembly and withdraw from the vehicle.

Refit
5. Reverse removal procedure.
6. Tighten rear base to floor securing screws to 29 Nm.
7. Tighten front base to floor securing screws to 22 Nm.