Removal and Replacement

Airbag Harness

Remove
1. Remover driver's airbag.
2. Remove passenger's airbag.
3. Remove fascia panel assembly.
4. Remove heater blower unit.
5. Remove heater and cooler unit.

Pre 97 MY







6. Remove 3 screws securing expansion tank and position expansion tank aside.
7. Disconnect multiplug from each crash sensor.
8. Release airbag harness from clips and ties along the bulkhead and each valance.
9. Displace airbag harness grommet to inside of bulkhead and feed harness through bulkhead.

All Models







10. Disconnect multiplug from airbag control unit.
11. Release airbag harness from under carpet.







12. Release ties securing harness along toeboard.
13. Disconnect steering wheel airbag multiplug.
14. Release airbag harness from driver's side and remove.

Refit
15. Reverse removal procedure.


CAUTION: Ensure harness is correctly routed in harness protector and that all securing clips and ties are correctly engaged and harness is undamaged. Ensure all connections are fully engaged and retained by their latches.