Evaporator Temperature Sensor / Switch: Service and Repair
Remove1. Remove heater and cooler unit. Service and Repair
2. Remove lower cover and evaporator. Service and Repair
3. Remove 5 clips and screw securing evaporator top cover.
4. Remove evaporator top cover.
5. Remove thermostat sensor from evaporator matrix.
6. Remove 2 screws securing sensor unit.
7. Remove thermostat and insulation.
Refit
8. Reverse removal procedure.
CAUTION: The thermostat insulation must be installed in the ORIGINAL POSITION in the evaporator.