Pressure Test

SPECIAL TOOLS
Tool No. LRT 44 007: 0 To 20 Bar, 0 To 300 lbs/in2 Pressure Gauge
Tool No. LRT 44 008: Flexible Hose Adaptor
Tool No. LRT 44 009: Adapter, Pressure Take Off
Or Their Equivalents

PROCEDURE
1. Site vehicle on a ramp [hoist].





2. From under gearbox, remove socket head plug.
- Located 10 cm from oil pipe.
- Install hose adaptor LRT 44 009.
3. Install hose LRT 44 008 to adaptor.
4. Install gauge LRT 44 007 to hose and route into vehicle, ensuring hose is clear of rotating parts and exhaust pipes.
5. Carry out road test. Road Test
6. Remove pressure gauge and adapters.

SPECIFICATIONS
2000 rev/min: 10 ± 0.3 bar (150 ± 5 psi)
Idle pressure: 6.9 ± 0.3 bar (100 ± 5 psi) at 665 to 735 rpm