A, B, D and E Post Trims

Remove
1. Remove aperture seal from appropriate area.
2. Remove retaining screws ('A' post lower trims)
3. Remove seat belt top mounting ('B' and 'D' post upper trims)
4. Release retaining clips, remove finisher.

Refit
5. Position finisher, secure with retaining clips and screws.
6. Fit seat belt top mounting. Tighten to 25 Nm (18 ft. lbs.)
7. Secure aperture seal.

NOTE: Illustration 76M 7128 shows the fixing method for the A, B, D and E post trim finishers.

1. A post upper
2. A post lower left hand
3. A post lower right hand
4. B post upper
5. B post lower
6. D post upper
7. D post lower
8. E post