Operation CHARM: Car repair manuals for everyone.

Memory Mirrors



MEMORY MIRRORS

CIRCUIT OPERATION

General
The following combinations of seat and mirror adjustment method will be available:
3. Memory driver's seat, memory passenger seat and memory mirrors.
4. Memory driver's seat, electric passenger's seat and memory mirrors.
5. Mechanically adjusted driver's and passenger's seats, electric mirrors.

The memory mirror system will store the horizontal and vertical position of each mirror. Storage and recall functions will be controlled by the driver's memory seat control switches, each seat memory position having a mirror memory position associated with it.

Memory mirror enable and one touch enable will occur under the same conditions as memory seat enable and one touch enable.

Reverse dip position
Reverse mirror dipping will be enabled when the presence of a driver's side seat memory outstation is detected.

If a driver's seat memory store sequence is executed whilst auxiliary is selected and the transmission is in reverse, then the stored mirror position will be the position that the mirrors will dip to when reverse gear is next selected and that memory number is currently recalled. To protect against accidental setting, the mirror position will only be stored if it has been altered since reverse was selected and a message on the instrument pack will inform the driver that the mirror position has been stored.

The function may be toggled on and off by holding the memory store button for at least 2 seconds whilst in reverse gear with auxiliary or ignition selected.

Successful toggling of the function will be accompanied by the message "Mirror dip on"/"Mirror dip off" as described in the message parameter table.

Successful toggling of the function will result in the mirrors moving immediately to the dipped/undipped position as appropriate.

Storing a new reverse dip position will automatically toggle the function on.

Vehicles fitted with automatic transmission will have a 0.5 sec delay following the selection of reverse gear prior to the mirror dip position being recalled.