Inhibit Inputs

The Memory Seat ECU (Z146) will not permit movement to the memorized position when the ignition is in position II unless the handbrake is applied and vehicle speed is below 6 kmh. Vehicles equipped with an automatic transmission must also be in PARK or NEUTRAL for operation to occur.

The ECU monitors the Handbrake Switch (X191) position at terminal C302/24. When the handbrake is in position 1, the brake is applied and ground is applied to the ECU terminal C302/24.

Vehicle speed is monitored by the ECU at terminal C302/7 through the vehicle speed output signal applied by the Instrument Cluster (Z142).

The ECU monitors gear position through the Park/Neutral Position Switch (X167). The switch grounds the ECU at terminal C302/11 when the transmission is in PARK or NEUTRAL.