Clutch Switch: Service and Repair

Service repair no - 19.75.34 - Clutch Switch
Service repair no - 19.75.35 - Brake Switch (not fitted to diesel variants)

Remove
1. Remove drivers side fascia closing panel.
2. Remove 3 scrivet fasteners securing lower closing panel. Release panel to gain access to blower motor ducting.







3. Release ducting from blower motor housing and heater. Remove blower motor ducting.
4. Release switch/vent valve from pedal bracket.







5. Disconnect vacuum hose and multiplug from switch.


NOTE: Vacuum hose fitted to petrol variants only.


6. Remove switch/vent valve.

Refit
7. Reverse removal procedure.


NOTE: The switch/vent valve is factory set and does not require adjustment in service.