Vacuum Pump: Service and Repair

Service repair no - 19.75.06

Remove







1. Remove 2 screws securing actuator bracket.







2. Release cover and disconnect multiplug from vacuum control unit.







3. Remove vacuum hose from control unit.
4. Release 3 rubber mountings and remove control unit.
5. Remove 3 rubber mountings from control unit.

Refit
6. Fit rubber mountings to control unit.
7. Position control unit and secure mountings.
8. Connect vacuum hose to control unit.
9. Connect multiplug and fit cover.
10. Position actuator bracket and secure with screws.