Removal

Rocker Arm Assembly - Removal






1. LH rocker shaft only: Remove screw securing dipstick tube to rocker cover.





2. Remove 4 bolts securing rocker cover to cylinder head.

NOTE: Mark position of 2 longer bolts.

3. Remove rocker cover.
4. Remove and discard gasket from rocker cover.
5. Mark each rocker shaft in relation to original cylinder head.

CAUTION: Incorrect installation of rocker shafts will lead to an oil feed restriction.





6. Progressively slacken and remove 4 bolts securing rocker shaft assembly to cylinder head.
7. Remove rocker shaft assembly.
8. Remove pushrods and store in installed order.