Headlamp Switch: Service and Repair
REMOVE1. Remove steering wheel.
2. Release 2 thumb buckles and remove fusebox cover.
3. Remove 3 screws securing lower half of switch cover to steering column.
4. Separate the halves of the switch cover and remove from steering column.
5. Release 2 clips securing rotary coupler to column switch assembly.
6. Release rotary coupler.
CAUTION: Do not allow rotary coupler to hang on its harness.
7. Disconnect 4 connectors from column switch assembly.
8. Remove column switch assembly from steering column.
9. Remove headlamp switch.
REFIT
1. Reverse removal procedure.