Camshaft Position Sensor: Service and Repair

Service repair no - 18.30.24

Remove
1. Disconnect battery negative lead.
2. Release 2 clips securing upper fan cowl. Remove cowl.







3. Release tension from auxiliary belt. Remove belt from crankshaft pulley.







4. Release CMP sensor connector from bracket. Disconnect multiplug.







5. Remove bolt securing CMP sensor to front cover.
6. Remove CMP sensor.

Refit
7. Ensure mating surfaces are clean.
8. Engage CMP sensor in front cover location. Secure with bolt. Tighten to 8 Nm. (6 lbf. ft)
9. Secure CMP sensor connector to bracket. Connect multiplug.
10. Turn auxiliary belt tensioner. Refit belt to crankshaft pulley.
11. Fit upper fan cowl. Secure with clips.
12. Reconnect battery negative lead.