Front Height Sensor

Height Sensor

Removal

1. Raise the vehicle.

WARNING: Support on safety stands.





2. Remove scrivet from rear lower edge of front wheel arch liner. Lift liner for access to height sensor multiplug.





3. Disconnect multiplug.





4. Release sensor link from radius arm.
5. Remove 2 bolts and remove sensor and sensor cover.
6. Remove cover from sensor.

Refit
1. Fit cover to sensor.
2. Fit sensor, tighten bolts to 12 Nm (9 ft lbs).

CAUTION: Ensure bolts pass through cover and sensor.

3. Fit sensor link to radius arm. Tighten to 8 Nm.(6 ft lbs.).
4. Reverse removal procedure.
5. Recalibrate system if a new sensor has been fitted.