Radius Arm: Service and Repair

Radius Arm And Bushes

Service Repair No - 60.10.16

Removal
1. Depressurize air suspension.
2. Remove anti-roll bar.
3. Remove front road wheel.
4. Remove nut, disconnect track rod from swivel hub. Move rod aside.
5. Remove nut, disconnect height sensor link from radius arm.
6. Support axle on a jack.
7. Remove nuts and bolts securing radius arm to axle.





8. Remove nut securing radius arm to chassis bracket.
9. Remove radius arm.





10. Press bushes from radius arm using LRT-60-004.

Refit

11. Clean radius arm, lubricate bushes and their mating faces.





12. Fit rubber bushes using LRT-60-004.
13. Fit radius arm and tighten chassis fixings to 160 Nm (118 ft lbs).
14. Tighten fixings to axle to 125 Nm (92 ft lbs).
15. Fit anti-roll bar, connect height sensor link and track rod.
16. Remove safety stands. Lower vehicle.
17. Repressurize air suspension.