Remove Plenum Chamber

1. Loosen clamp on intake hose to plenum chamber. Release hose.

2. Remove throttle and cruise control cables from throttle linkage.

3. Remove throttle and cruise control cables from bracket.

4. Remove harness clip from throttle linkage bracket.

5. Disconnect breather hose from plenum chamber.

6. Disconnect multi-plugs from stepper motor and throttle potentiometer.

7. Remove six bolts securing plenum chamber. Remove plenum chamber from ram pipe housing.

8. Clamp coolant hoses with an approved hose clamp.

9. Disconnect coolant hoses from water jacket. Remove plenum chamber.

10. Remove purge hose from ram pipe housing and set aside.

11. Remove screw holding dipstick tube to valve cover.

12. Remove spark plug wires from spark plugs and guide clips on rocker covers.