Output Shaft: Service and Repair

REMOVAL
1. Disconnect battery negative lead.
2. Remove transfer box.
3. Drain fluid from gearbox.





4. Remove seal from gearbox casing using a suitable lever.

CAUTION: Ensure location does not become damaged as seal is levered from casing.

INSTALLATION
5. Clean seal location and running surface on transfer gearbox input shaft.
6. Lubricate seal lip with clean transmission fluid.
7. Install seal to gearbox casing using LRT-44-001
8. Install transfer box.
9. Reconnect battery negative lead.
10. Replenish transmission fluids.