Glass - Rear Door

GLASS - REAR DOOR

Service repair no - 76.31.02

Remove

1. Remove outer waist seal.
2. Remove door trim casing.
3. Remove speaker and plastic sheet.
4. Remove window motor and control panel assembly.
5. Remove glass rear channel.
6. Remove wedges or tape from glass.
7. Release glass from channel. Raise to remove glass from door.







Refit

8. Fit glass to door and align to frame.
9. Wedge or use tape to hold glass in door.
10. Fit glass rear channel.
11. Fit window motor and control panel.
12. Fit speaker and plastic sheet.
13. Fit trim casing.
14. Fit outer waist seal.