Ambient Temperature Sensor - Up to VIN 381430

Service repair no - 82.20.91

Remove
1. Remove plenum air intake panels. Service and Repair
2. LHD only: Remove plastic cover, nut and washers from LH wiper spindle.





3. Disconnect heated screen LH multiplug. Release plug from clip.





4. Remove 6 bolts securing LH scuttle side panel. Remove panel.
5. Remove pollen filter.





6. Turn sensor anti-clockwise. Release from recirculation flap housing.
7. Remove sensor from multiplug.

Refit
8. Reverse removal procedure.

NOTE: LHD only: Tighten nut on LH wiper spindle to 11 Nm. (8 labor.ft)