Solenoid Coil

SOLENOID COIL

NOTE: Solenoid "A" which has blue fly-leads, is not serviceable.

Remove

1. Remove valve block assembly, refer to Solenoid Valve Block and Drive Pack
2. Identify solenoid coil to be removed.






3. Disconnect solenoid coil multiplug.
4. Clean area around solenoid coil and valve block.

CAUTION: It is essential that no dirt or grease enters the system.

5. Remove 2 screws securing coil to valve block.
6. Release coil from valve block. Collect and discard '0' ring seal.






7. Remove face protector from connector.