Programming and Relearning

SYSTEM CALIBRATION

Equipment required: Testbook

Note: Land Rover DOES NOT provide a procedure to depressurize air suspension system without the use of the Testbook scan tool.

NOTE: This procedure must be carried out when a new ECU or height sensor has been fitted.

Calibration will also be required if any part affecting damper relationship to body is changed i.e. damper mounts, axles, chassis unit and body panels. The vehicle can be calibrated laden or unladen, but Gross Vehicle Weight must not be exceeded. Tires must all be the same size and at the correct pressures.

IMPORTANT: The floor used for calibration must be level and smooth in all directions to enable procedure to be carried out successfully.