Cover - Squab - Rear Seat - RH

78.90.13 Cover - Squab - Rear Seat - RH

Remove

1. Fold RH rear seat forward.







2. Remove 2 screws and remove seat belt reel cover.







3. Remove nut and release seat belt reel.







4. Remove 5 screws and remove both end covers.
5. Remove 3 bolts from seat squab and remove squab from cushion.







6. Remove both head restraints.
7. Remove arm rest aperture trim.
8. Remove 2 screws from arm rest and remove arm rest.







9. Release squab from arm rest aperture.







10. Release squab from seat belt aperture and rear of frame.







11. Release squab from sides and bottom of frame. Release latch escutcheon and remove back cloth.







12. Release and remove 4 head restraint guide tubes.







13. Release squab lock warning button escutcheon.







14. Remove squab cover and pad from frame.







15. Remove and discard 12 hog rings and remove cover from pad.

Refit

1. Position squab cover to pad and secure hog rings.
2. Fit squab cover and pad to frame.
3. Fit head restraint guide tubes and seat lock warning button escutcheon.
4. Fit cover to sides and bottom of frame.
5. Fit cover to rear of frame and seat belt aperture.
6. Position latch escutcheon to back cloth and fit to frame. Ensure that the latch escutcheon is secured correctly into latch housing.
7. Fit cover to arm rest aperture.
8. Fit arm rest and tighten screws.
9. Fit arm rest aperture trim.
10. Fit head restraints.
11. Fit cushion to squab and tighten Torx bolts.
12. Fit side covers and tighten screws.
13. Position seat belt reel in seat squab and tighten nut to 32 Nm (24 lbf.ft).
14. Fit seat belt reel cover and tighten screws.
15. Secure rear seat in locked position.