Engine - Variable Induction System Motor Gasket R & R
No: 19/03/03/NASRef:
Issue: 1
Date: 04/04/03
VIS Motor Gasket Replacement Guidelines
AFFECTED VEHICLE RANGE:
Freelander (LN) All
SITUATION:
INSPECTION AND RE-USE OF VIS MOTOR GASKETS
Previously Land Rover had not supplied the Variable Induction System (VIS) motor gaskets as spare parts. Technical Alert TA023001 had instructed Retailers to retain the seals for reuse.
RESOLUTION:
VIS MOTOR GASKETS NOW AVAILABLE AS SPARES
The VIS motor gaskets and screws may be reused after careful inspection for damage. (Refer to Alert TA02 3001). The gaskets and screws have now been made available as spare parts in the event of damage or loss.
PARTS INFORMATION:
LWF000020L Seal Qty 1 Use with balance valve motor MKE100110L
LYP000340L Fastener Qty 4 Use with balance valve motor MKE100110L
LWF000030L Seal Qty 1 Use with power valve motor MKE100100L
LYP000330L Fastener Qty 4 Use with power valve motor MKE100100L
WARRANTY CLAIMS:
Normal warranty policy and procedures apply.
Material allowance is included in labor operation.
REPAIR PROCEDURE
INSPECT VIS MOTOR GASKETS
1. Refer to Technical Alert TA021901 for information relating to troubleshooting VIS motor complaints.
2. If a VIS motor is removed for any reason, inspect the seal for damage. (Figure 1)
3. If no damage is evident, clean and install the used seal to the VIS motor.
4. If the seal is damaged, install a new seal.