Stalk - Rear Seat Belt - LH - 3 Door

Stalk - Rear Seat Belt - LH - 3 Door

Service Repair No - 76.73.32

Remove
1. Remove rear seat.







2. Remove 2 screws from hinge cover and remove cover from seat hinge.
3. Remove 4 screws and remove rear seat centre console.







4. Release rear seat cushion cover retainers and position cushion aside.







5. Remove Torx bolt from seat belt buckle and remove buckle.

Refit
1. Fit buckle to seat frame and tighten Torx bolt to 32 Nm (24 lbf.ft).
2. Position seat cushion and secure cover retainers.
3. Fit centre console and secure with screws.
4. Fit hinge cover and secure with screws.
5. Fit rear seat.