Rear Bumper: Service and Repair

Bumper Valance - Rear - Up To 04MY

Service Repair No - 76.22.74

Remove
1. Remove rear mud flaps.
2. Remove both rear tail lamps.
3. Remove rear wheel arch extensions.





4. Remove 10 screws securing bumper valance to body.
5. Remove 2 nuts and bolts securing bumper valance to armature.
6. Remove 5 scrivets securing bumper valance to body.
7. Remove 2 mud flap brackets.
8. NAS Models: Release side repeater, disconnect multiplug and remove repeater.
9. With assistance remove bumper valance.

Refit
1. With assistance fit bumper valance and secure with scrivets, screws, nuts and bolts.
2. NAS Models: Feed side repeater harness through bumper, connect multiplug and fit repeater.
3. Fit mud flap brackets and secure with screws.
4. Fit rear wheel arch extensions.
5. Fit both rear tail lamps.
6. Fit rear mud flaps.