Harness - Tailgate

Harness - Tailgate

Remove
1. Remove RH rear quarter lower trim casing.
2. Remove tail door plastic sheet.





3. Remove 3 nuts and remove spare wheel.





4. Remove 3 screws securing CHMSL, disconnect multiplug and remove CHMSL.
5. Release 2 harness clips.





6. Disconnect rear washer tube from behind the spare wheel carrier.





7. Remove 3 nuts from number plate lamp housing and release housing.





8. Disconnect 2 Lucars and multiplug from housing.
9. Collect 2 spacers and housing seal.
10. Remove housing.





11. Disconnect 2 Lucars from rear screen element.
12. Remove 4 screws from door latch, release door latch to access multiplugs and harness clips.





13. Disconnect 2 multiplugs from door lock.





14. Disconnect multiplug from rear wiper motor.
15. Disconnect multiplug from rear window motor.





16. Release and disconnect 3 multiplugs and washer tube from main harness at 'E' post.





17. Release tail door harness from 13 retaining clips.
18. Release harness sheath from tail door and 'E' post.
19. Remove harness from vehicle.

Refit
1. Position harness to vehicle and secure in retaining clips.
2. Secure harness sheath to tail door and 'E' post.
3. Connect multiplugs and washer tube to main harness, secure multiplugs to body.
4. Connect multiplugs to window motor, wiper motor and door lock.
5. Position door latch, fit and tighten screws.
6. Connect Lucars to heated rear screen.
7. Position number plate lamp housing, locate seal and fit spacers.
8. Connect multiplug and Lucars to housing.
9. Fit housing and secure with nuts.
10. Connect washer tube behind spare wheel carrier.
11. Secure harness clips to spare wheel carrier, connect multiplug to CHMSL, fit CHMSL and secure with screws.
12. Fit spare wheel and secure with nuts.
13. Fit tail door plastic sheet.
14. Fit rear lower trim casing