Trunk / Liftgate Handle: Service and Repair

Handle - Exterior - Tail Door

Service Repair No - 76.58.05

Remove
1. Remove tail door plastic sheet.
2. Raise glass by clicking latch.





3. Remove 3 nuts securing tail door handle to tail door.





4. Release handle from tail door.
5. Disconnect 2 Lucars from number plate lamp.
6. Disconnect multiplug and remove handle from door.





7. Collect gasket.
8. Remove nut from lock barrel.
9. Remove lock barrel from handle.

Refit
1. Fit lock barrel to handle.
2. Fit gasket to handle.
3. Position handle and connect Lucars and multiplug.
4. Fit handle to door and tighten nuts to 5 Nm (3.5 ft. lbs.).
5. Fit tail door plastic sheet.
6. Reset latch to lower glass.
7. Close door.