Console - Front - Up To 04MY

76.25.01 Console - Front - Up To 04MY

Remove

1. Remove rear console.
2. Remove radio.
3. Remove gear lever knob.
4. Manual gearbox only: Remove descent selector.







5. Remove 3 heater control knobs.
6. Remove 2 screws from heater control panel.
7. Remove heater control panel.







8. Release tags and remove radio cage.
9. Remove 2 screws from top of console.
10. Remove 4 screws securing heater controls to centre console.
11. Remove 3 screws from centre and sides of console.







12. Disconnect multiplugs and bulb holder from switch pack.
13. Automatic gearbox only: Disconnect multiplugs from gear selector.







14. Remove centre console.
15. Remove 4 screws from switch pack assembly and remove assembly.

Refit

1. Position switch pack assembly, fit and tighten screws.
2. Position console to fascia.
3. Connect multiplugs and bulb holder to switch pack.
4. Automatic gearbox only: Connect multiplugs to gear selector.
5. Fit centre console.
6. Fit and tighten screws securing centre and sides to console.
7. Fit and tighten screws securing switch pack to console.
8. Fit and tighten screws to top of console.
9. Position radio cage to console and secure with retaining tags.
10. Position heater control panel, fit and tighten screws.
11. Fit heater control knobs.
12. Manual gearbox only: Fit descent selector.
13. Fit gear lever knob.
14. Fit radio.
15. Fit rear console.