Frame & Hood Cover - Assembly - Remove For Access & Refit

76.61.10.99 Frame & Hood Cover - Assembly - Remove For Access & Refit

Remove







1. Remove both side screens, lift Velcro, release zips and press studs.







2. Release stowage cover.







3. Release tension on side bars.







4. Release 'E' post fabric.







5. Release hood frame from rear lockbars.







6. Push canvas forward and secure clips in bars.







7. Wrap up tonneau and secure in place.







8. Release and remove hinge pins, release tension bars.







9. Loosen header clamp bolts and release header clamps.
10. Remove soft back assembly.

Refit

1. Position soft back assembly, secure in header clamps.
2. Tighten header clamps.
3. Align tension bars and fit hinge pins.
4. Release tonneau from securing tie.
5. Release clips in bars and pull canvas to the rear.
6. Secure tail door frame lock in lock bars.
7. Secure 'E' post fabric in position.
8. Tension side bars.
9. Position tonneau cover.
10. Fit side screens, secure zips and press studs and position Velcro covers.