Cover - Cushion - Rear Single Seat - 3 Door

78.40.08 Cover - Cushion - Rear Single Seat - 3 Door

Remove

1. Remove rear seat assembly.







2. Remove 2 screws securing console cover and remove cover.







3. Remove 4 screws and remove rear seat centre console.
4. Remove 4 screws securing end covers and remove covers.
5. Remove 4 Torx bolts and remove squab assembly from cushion assembly.







6. Release back board assembly from squab frame and remove back board.







7. Release rear of cushion cover from frame.
8. Release sides and front of cushion cover from frame.







9. Remove cover and pad from frame.







10. Remove and discard 13 hog rings and remove cover from pad.

Refit

1. Position cushion cover to pad and secure with hog rings.
2. Fit cover to pad.
3. Position and secure cushion cover and pad to frame.
4. Fit cushion to squab and tighten Torx bolts to 28 Nm (21 lbf.ft).
5. Position back board and secure to frame.
6. Fit end covers and tighten screws.
7. Position rear seat console and secure with screws.
8. Position console cover and secure with screws.
9. Fit rear seat.