Latch - Rear Squab - RH

Latch - Rear Squab - RH

Service Repair No - 78.80.05

Remove
1 Remove rear seat squab cover.





2. Remove 2 Torx screws from squab lock.
3. Remove 3 screws from lock button.
4. Release cable from lever abutment and remove latch assembly.

Refit
1. Position latch assembly to frame and locate cable in abutment.
2. Fit Torx screws to squab lock and tighten to 20 Nm (15 ft. lbs.).
3. Fit screws to lock button.
4. Fit squab cover.