Parking Brake Lever: Service and Repair

Lever Assembly - Handbrake

Service Repair No - 70.35.08

Remove
1. Remove rear console.





2. Disconnect Lucar from handbrake warning switch.
3. Remove cable adjusting nut.





4. Remove 2 bolt securing handbrake lever assembly.
5. Release adjusting rod from equalizer and remove handbrake lever assembly.
6. Remove spring from adjusting rod.

Refit
1. Fit spring to adjusting rod.
2. Fit handbrake lever assembly, fit bolts and tighten to 22 Nm (16 ft. lbs.).
3. Fit cable adjusting nut.
4. Connect Lucar to handbrake switch.
5. Adjust handbrake.
6. Fit rear console.