3 Door

Remove







1. Remove root lamp lens.
2. Remove 2 screws, release roof lamp and disconnect multiplug.
3. Release headlining rear finisher from roof panel and remove finisher.







4. Release door aperture seals to release headlining.
5. Release 3 studs securing rear edge of headlining to roof panel.
6. Remove 4 screws securing headlining to 'B' posts.
7. Release 2 studs securing sides of headlining to body.
8. Lower front edge of headlining.
9. Release sun roof seal.







10. Remove 2 screws from volumetric sensor.
11. Disconnect multiplug from volumetric sensor and remove.

Refit
1. Position volumetric sensor and connect multiplug.
2. Fit sensor and secure with screws.
3. Fit headlining to 'B' posts and secure with screws.
4. Secure headlining behind rear vent rubbers.
5. Fit headlining rear finisher.
6. Fit door aperture seals.
7. Fit headlining to sun roof seal.
8. Position roof lamp and connect multiplug.
9. Fit roof lamp and secure with screws.
10. Fit lens to roof lamp.