5 Door

Remove
1. Remove LH rear quarter upper trim casing.
2. Remove LH 'A' post finisher.
3. Release front and rear LH door seals.







4. Release and remove sun roof finisher.







5. Remove screw covers and screws from both LH grab handles and remove grab handles.
6. Remove LH sun visor.







7. Remove trim stud from center of headlining.







8. Release LH 'B/C' post upper finisher.
9. Carefully lower headlining to gain access to volumetric sensor.







10. Disconnect multiplug from volumetric sensor.
11. Remove 2 screws and remove sensor.

Refit
1. Fit volumetric sensor and secure with screws.
2. Connect multiplug to sensor.
3. Position 'B/C' post upper finisher and secure with clips.
4. Fit sun visor.
5. Fit retaining stud to headlining.
6. Fit grab handles, tighten screws and fit screw covers.
7. Fit 'A' post finisher.
8. Position and secure sun roof finisher.
9. Fit rear quarter upper trim casing.
10. Secure front and rear door seals.