Door Harness

Remove
1. Remove rear door plastic sheet.





2. Disconnect multiplugs from door latch and window lift motor.
3. Release 7 clips securing door harness to door.





4. Release 'B/C' post upper finisher from 6 clips and position aside.





5. Release multiplug from location at base of 'B/C' post and disconnect multiplug.
6. Release harness sheath from 'B/C' post and pull door harness through 'B/C' post.
7. Release sheath from front edge of door and pull harness into door.
8. Remove door harness.

Refit
1. Position harness to door and secure with clips.
2. Connect multiplugs to door latch and window lift motor.
3. Feed harness through front edge of door and secure sheath to door.
4. Feed harness into 'B/C' post and secure sheath to 'B/C' post.
5. Connect and secure multiplug at base of 'B/C' post.
6. Position 'B/C' post upper finisher and secure with clips.
7. Fit rear door plastic sheet.