Front Suspension and Subframe
Torque Wrench Settings| TORQUE DESCRIPTION | METRIC | IMPERIAL |
| Anti-roll bar saddle clamp to subframe bolts | 23 Nm | 17 lbf.ft |
| Anti-roll bar link to damper nut | 55 Nm | 41 Ibf.ft |
| Anti-roll bar to link nut | 55 Nm | 41 Ibf.ft |
| Damper assembly to body top mounting nuts Tighten with weight of vehicle on suspension | 45 Nm | 33 Ibf ft |
| Damper to hub nuts and bolts Tighten with weight of vehicle on suspension | 205 Nm | 151 Ibf.ft |
| Damper shaft locking nut | 57 Nm | 42 Ibf ft |
| Engine lower steady to support beam bolt | 100 Nm | 74 Ibf ft |
| Engine tie-bar to sump bolts | 100 Nm | 74 Ibf ft |
| Front subframe to body front bolts | 190 Nm | 140 Ibf.ft |
| Hub drive shaft nut Use NEW nuts | 400 Nm | 295 Ibf ft |
| Hub assembly to lower swivel joint nut | 65 Nm | 48 Ibf ft |
| Lower arm front bush to subframe bolt Tighten with weight of vehicle on suspension | 190 Nm | 140 Ibf ft |
| Lower arm rear bush housing bolts to body Tighten with weight of vehicle on suspension | 105 Nm | 77 Ibf ft |
| Lower arm to rear bush housing nut Tighten with weight of vehicle on suspension | 140 Nm | 103 Ibf ft |
| Road wheel nuts Tighten in diagonal sequence | 115 Nm | 85 Ibf ft |
| Support beam to body bolts | 190 Nm | 140 Ibf.ft |