Dashboard

Dashboard

Remove
1. Remove front console.
2. Remove rotary coupler.





3. Disconnect 4 multiplugs from wiper/indicator switch.





4. Loosen clamping screw and remove wiper/ indicator switch.
5. Remove 2 screws from steering column lower finisher and remove finisher.





6. Open drivers glove box lid and remove fuse box cover.





7. Disconnect 2 multiplugs from fusebox.
8. Close glove box.
9. Remove clock.
10. Remove both 'A' post upper trim finishers.
11. Models without passenger airbag: Remove fascia stowage box.
12. Models with passenger airbag: Remove passenger airbag.





13. Disconnect 2 main harness to fascia harness multiplugs.





14. Remove 12 bolts securing fascia.
15. With assistance remove fascia.





16. Remove 4 screws, disconnect 3 multiplugs from switches, and remove instrument bezel finisher.





17. Remove 2 screws from instrument upper cover and remove cover.





18. Disconnect 3 multiplugs from instrument pack.





19. Release mirror and headlamp levelling switches.
20. Disconnect multiplugs from mirror switch and headlamp levelling switch.





21. Disconnect 4 Lucars from glove box lamp and switch.





22. Release 9 harness clips.
23. Feed harness through fascia and remove harness.





24. Remove 4 screws from instrument pack and remove instrument pack.





25. Remove 6 screws from instrument pack lower cover and remove cover.





26. Models without passenger airbag: Remove 4 nuts from grab handle and remove handle.





27. Remove 4 screws from center bracket and remove bracket.





28. Remove 4 face level vents and collect seals.
29. Remove glove box hinge pins and remove glove box lids.
30. Remove glove box lamp and mat.
31. Remove 4 screws from glove box and remove glove box.
32. Remove 2 screws from each glove box lock and remove locks.
33. Remove switch blank.





34. Disconnect multiplug from immobilization ECU.
35. Remove 2 nuts securing immobilization ECU to fascia and remove ECU.
36. Remove fascia and coin tray mats.

Refit
1. Fit fascia and coin tray mats.
2. Fit immobilization ECU to fascia and secure with nuts.
3. Connect multiplug to immobilization ECU.
4. Fit switch blank.
5. Fit glove box locks to fascia and secure with screws.
6. Fit glove box and secure with screws.
7. Fit glove box lamp and mat.
8. Fit glove box lids and secure hinge pins.
9. Fit face level vents and seals to fascia.
10. Fit center bracket and secure with screws.
11. Models without passenger airbag: Fit grab handle and secure with nuts.
12. Fit instrument pack lower cover and secure with screws.
13. Fit instrument pack to fascia and secure with screws.
14. Fit fascia harness to fascia and secure with clips.
15. Connect Lucars to glove box lamp and switch.
16. Connect multiplugs to mirror switch and headlamp levelling switch.
17. Fit mirror switch and headlamp levelling switch.
18. Connect multiplugs to instrument pack.
19. Fit instrument pack upper cover and secure with screws.
20. Connect multiplugs to switches on instrument bezel finisher, fit bezel and secure with screws.
21. With assistance fit fascia to vehicle and secure with bolts.
22. Connect fascia harness multiplugs to main harness.
23. Models with passenger airbag: Fit passenger airbag.
24. Models without passenger airbag: Fit fascia stowage box.
25. Fit 'A post upper trim finishers.
26. Fit clock.
27. Open drivers glove box lid and remove fuse box cover.
28. Connect multiplugs to fusebox.
29. Fit fusebox cover and close glove box lid.
30. Fit steering column lower cover and secure with screws.
31. Fit wiper/indicator switch and tighten clamping screw.
32. Connect multiplugs to wiper/indicator switch.
33. Fit rotary coupler.
34. Fit front console.