Fascia - From 04MY

76.46.23 Fascia - From 04MY

Remove

1. Remove the Radio/CD module.







2. Remove 4 screws securing heater controls to centre console.
3. Remove rotary coupler.







4. Disconnect 4 multiplugs from wiper/indicator switch.







5. Loosen clamping screw and remove wiper/indicator switch.
6. Remove 2 screws from steering column lower finisher and remove finisher.







7. Open drivers glove box lid and remove fuse box cover.






8. Disconnect 2 multiplugs from fuse box.
9. Close glove box.
10. Remove clock.
11. Remove hazard warning switch.
12. Remove both 'A' post upper trim finishers.
13. Remove passenger airbag.







14. Disconnect 2 multiplugs from fascia harness.







15. Remove 14 bolts securing fascia.
16. With assistance remove fascia.

NOTE: Do not carry out further dismantling if component is removed for access only.







17. Disconnect 4 multiplugs from fascia switch assembly.
18. Remove 4 switches from fascia switch carrier.







19. Release mirror switch from fascia and disconnect multiplug, remove switch assembly.







20. Remove passenger glove box internal finisher and remove 4 screws securing liner.
21. Release glove box liner and release lamp assembly.
22. Remove passenger side glove box liner assembly.







23. Remove glove box hinge pins and remove glove box lids.
24. Remove cruise control switch carrier assembly from fascia.
25. Carefully release and remove 4 face level fascia air vents.







26. Remove 2 screws securing drivers side glove box striker plate assembly and collect striker.







27. Noting fitted position remove fascia harness assembly.

Refit

1. Fit and secure fascia harness.
2. Fit striker plate, secure with screws and adjust if necessary.
3. Fit passenger side glove box assembly.
4. Fit face level air vents.
5. Fit and secure cruise switch carrier assembly to fascia.
6. Fit glove box lids and secure hinge pins.
7. Connect mirror switch multiplug and fit switch assembly to fascia.
8. Fit switches to fascia carrier and connect multiplugs.
9. With assistance fit fascia to vehicle and secure bolts to 10 Nm (7 lbf.ft).
10. Connect fascia harness multiplugs to main harness.
11. Fit passenger airbag.
12. Fit 'A' post upper trim finishers.
13. Fit hazard warning switch.
14. Fit clock.
15. Open drivers side glove box.
16. Fit Radio/CD module.
17. Fit fuse box cover and close glove box lid.
18. Fit steering column lower cover and secure with screws.
19. Fit wiper/indicator switch and tighten clamping screw.
20. Connect multiplugs to wiper/indicator switch.
21. Fit rotary coupler.
22. Fit heater control to fascia and secure with screws.