Catch and Retainer - Hard-Back - Front

76.61.94 Catch And Retainer - Hard-back - Front

Remove

1. Remove hard-back.







2. Remove 2 Torx screws securing catch, slide catch from position and remove catch.







3. Remove Torx screw securing roof finisher to hard-back retainer.
4. Remove 3 Torx screws securing hard-back retainer and remove retainer.

Refit

1. Position hard-back retainer, fit Torx screws and tighten to 10 Nm (7.5 lbf.ft).
2. Fit Torx screw securing roof finisher.
3. Position catch, fit Torx screws and tighten to 10 Nm (7.5 lbf.ft).

CAUTION: Ensure formed washer is correctly located in catch recess.

4. Fit hard-back.