Catch and Retainer - Hard-Back - Rear

76.61.95 Catch And Retainer - Hard-back - Rear

Remove

1. Remove hard-back or soft-back.







2. Remove 2 screws securing 'E' post finisher, release finisher from 2 clips and remove finisher.







3. Remove 3 Torx screws securing catch and remove catch.
4. Remove lower rear quarter trim casing.







5. Remove 3 Torx screws securing hard-back retainer and remove retainer.

Refit

1. Position catch, fit Torx screws and tighten to 10 Nm (7.5 lbf.ft).
2. Position 'E' post finisher, engage in clips and secure with screws.
3. Position hard-back retainer, fit Torx screws and tighten to 10 Nm (7.5 lbf.ft).
4. Fit lower rear quarter trim casing.
5. Fit hard-back or soft-back.