Cover - One Piece - Front Seat

78.30.01 Cover - One Piece - Front Seat Cushion

Remove

1. Remove front seat.







2. Remove recline control knob.
3. Release retaining studs from side covers and remove covers.
4. Disconnect 2 multiplugs from underside of seat cushion.
5. Release 2 clips securing multiplug to seat frame.
6. Remove 4 Torx bolts from squab frame and remove squab frame from cushion frame.







7. Release clips securing side edges of cushion cover to seat frame.
8. Release clip securing front edge of cushion cover to seat frame.







9. Release main central clip securing rear edge of cushion cover to seat frame.
10. Release rear of cushion pad from frame.
11. Remove cushion cover and pad.







12. Remove 12 hog rings securing cover to cushion.
13. Remove cushion cover from cushion.

Refit

1. Position cushion cover to cushion pad and secure to frame with hog rings in position noted during removal.
2. Position and secure cushion cover and pad to frame.
3. Fit squab frame to cushion frame and tighten Torx bolts to 45 Nm (33 lbf.ft).
4. Connect multiplugs.
5. Position multiplug to frame and secure clips.
6. Fit recline control knob.
7. Fit side covers and secure retaining studs.
8. Fit front seat.